Posted on 6 Comments

Why Measure Depth by Depth Micrometer why not Vernier caliper?

We also measure depth through Vernier caliper, but Vernier caliper does not deliver as much as accuracy and precision, because extension rod of Vernier caliper has no standard, it used only for comparison purpose.

depth vernier

Depth micrometer used to measure the depth of an object with precision and accuracy with least count of 0.01 mm. The measuring span is 25 mm just like in micrometer, that can change by changing upsetting rod.

How to Measure with Micrometer?

Depth Micrometer

Measuring Concept of Depth Micrometer is same as External Micrometer. The main differences are direction and position. Reading scale is Vertical in-depth micrometer and Direction of reading is opposite (starting from the end scale).

Enhance your Engineering Knowledge by Subscribe us

Specification

Some normal characteristics of Depth Micrometer describe follows

Accuracy

The accuracy of Depth Gauge is 0.01 mm which is fair enough for linear measurement and also accurate than vernier caliper. You can choose Digital Depth Micrometer, in order to simplify observation only. Both types of Depth Micrometer delivers the same accuracy.

Standard

Depth Micrometer follows national or international measurement standard, while vernier caliper is not(in order to check depth through extension rod only).

Cost

The cost of Depth Micrometer is low than digital type. Cost may be varied brands to brands, usually depend upon the quality of material used. Some most famous Brands which are known for their quality promise available in a market like Mitutoyo, baker etc.

The main use of depth micrometer is to check the depth of any objects. Basically used in industrial areas of manufacturing plants.

Posted on Leave a comment

Inside Micrometer & Least count

Inside Micrometer is used to measure the larger internal dimension. Inside Micrometer can measure internal Diameter of holes and registers.

inside micrometer
Mitutoyo’s Inside Micrometer

Types of Micrometer

There are various types of micrometers available in the industry each used for a specific purpose. One such micrometer is the “Inside Micrometer”.The inside micrometer is used to measure the inner diameter of objects that are bonded by walls,cylindrical bore or hollow pipe.There are two types of Inside Micrometer

  1. Analog type Inside Micrometer
  2. Digital type Inside Micrometer

The least count is 0.01 mm for analog type and 0.001 mm for digital type.

Enhance your Engineering Knowledge by Subscribe us

It can be measured by mm or inches and gives precise readings. The inside micrometers are also available in different designs and sizes for various measurements.

digital inside micrometer

The general equipment comprises of a measuring head or a micrometer unit; extension rods; spacer or spacing collar and a handle.

The measuring head consists of a thimble, which has one way marking and holds readings up to 50 mm which is the thimble division(TD) reading.

The sleeve or barrel have the main or index scale and sub-scales, they have two waymarking. The main scale can measure up to 25 mm and the measured value is known as MSD(main scale division).

On the frontier end of the measuring head which is also known as the anvil is a hole through which the extension rods are inserted to the inside micrometer. On one side of the anvil is a locking screw that is used to adjust the extension rods and holds it firm. On the other side, there is a hole that is used to fit the handle.

The handle is used to insert the inside micrometer through objects having depth. The posterior end also contains a screw that is used to adjust the thimble.

Range of inside Micrometer

Good quality steel is used in measuring head and spindle, but for the faces-high graded tool steel is used. The least count of the inside micrometer is 0.01 mm. The extension rods can be of different sizes ranging from 50 mm- 200mm, depending on the requirement.

inside micrometer 50-150
MItutoyo’s Micrometer

The extension rods are classified as

  • 50-75mm;
  • 75-100mm;
  • 100-125mm;
  • 125-150mm;
  • 150-175mm;
  • 175-200mm

.Extension rods are used for extensive objects having large diameters, it is used along with the spacer. The spacer is used for smaller diameter in addition to the measuring head. The spacer is of 12 mm.

How to measure inner diameter with Inside Micrometer?

The design of inside micrometers can also have jaws where one end is fixed and the other is movable.The working of inside micrometer is very simple.It basically consists of three steps

  1. fixing the rod and spacer
  2. adjusting the screw and
  3. measuring.

Its working same as analog type micrometer you can check here: External Micrometer

Precise readings are necessary to prevent faulty readings and leakages that can cause errors.

Posted on 1 Comment

What is Radius Gauge?

During the early period, there were no units for measuring thickness, which leads to the invention of the gauge.

radius gauge kresteel

Gauges are derived from the French word”jauge” which means the result of the measurement. We are all aware that gauges are used to measure the thickness, size or capacity of something.

concave and convex shape

Likewise, radius gauges are instruments that are used to measure the radius of the object.

blades of radius gauge

The radius gauge is combined with another gauge known as fillet gauge which in mechanics means a rounding of the part design.

kristeel radius gauge

Radius gauge is a radius measurement tool that can be used to measure the inner radius whereas the outer radius is measured by the fillet gauge.

Subscribe our YouTube Channel for More!

The construction of the radius gauge consists of two gauges having a number of steel strips or blades screwed together in one single holder. The screw is known as the lock screw.

parts of radius gauge

The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of stainless steel, but a  layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance.

The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement.

radius gauge

The markings are inscribed on the upper surface of every individual blade

Types of radius gauge

Three sets of radius gauge are manufactured.

  • Set 1 measure the radius available from 0.6-0.8mm.
  • Set 2 measures 1-7mm,
  • Set 3 measures 3-8.25mm.

The object or workpiece whose radius is to be measured is taken and the blades are inserted one by one to check which one fits in exactly by comparing it with the radius on the object.

Specifications of radius gauge

The radius gauge is light in weight and has an attractive design. The world keeps evolving and new and advanced technologies are taking over the old methods, hence a more optimistic and advanced gauge known as “digital radius gauge” is also available.

radius and fillet gauge

It is used for obtaining a high level of precision. It is a measuring tool that is user-friendly and the end user can operate it with great ease, fast since it is digital and portable.

Construction of radius gauge

T he construction of a digital radius gauge is entirely different than that of a simple radius gauge. It has a digital screen that is used to display values and for adjusting them, a measuring head and a number of brackets or jaws of different sizes ranging from 5-100mm.

The digital screen, measuring head and jaws are connected together and used. Another important aspect to be noted is that the simple radius gauge is used for measurement of small radius objects whereas the digital radius is used for larger radius measurement.

Posted on Leave a comment

How to check depth of any object by vernier depth gauge?

As a engineer, every one should know how to check depth of any object. To know this, vernier depth gauge is simple and easily available.

Vernier depth gauge is commonly used in depth measurement. Another depth measuring gauge could be Depth micrometer for more precise Measurement upto 0.01 mm.

up to depth micrometer, Vernier depth gauge is often used just because of its simplicity and speed of taking result value.

Types of Vernier Depth Gauge

There are two type of Vernier depth gauge-

  1. Analog type
  2. Digital type

The least count of analog vernier depth gauge is 0.02 mm while least count of digital type depth gauge is 0.01 mm

Vernier Depth Gauge Store

Vernier Depth Gauge is easy to available and can be shortlisted by customer review. We choose some of Vernier Depth gauge according to customer review.

Check Here

More at: Vernier Depth gauge

Posted on 5 Comments

3D measurements

Photo by Pixabay on Pexels.com

Unlike 2D images or shapes,3D has a different perspective.We tend to see the parameters just as the way they are in the real world.

Technologies are reaching great heights, faster and better innovations are made every day. We can make 3D measurements and solve real-time problems easily.

But why do we need 3D measurements?

  • To get a different outlook and point of view.
  • To analyse and interpret the solution to any outcome or project through a digitalized format.
  • To reduce human efforts and manual work which is tedious and time consuming.

How do you make a 3D measurement?

It can be made by three ways:

  • Using a Software.
  • 3D scanning.
  • By an instrument known as Coordinate Measuring Machine(CMM) connected to a PC.

Using a Software:

For modeling a prototype without the use of any paperwork or building up a replica, software is used.

The measurements are automatic and simple. The software extracts the parameters required or takes the information given by the designer. It shows a representation of the features on the screen.

Dimensions may be added by a click on the screen. Maya, Cinema4D, Blender, and SketchUp are a few examples of software used in the 3D measurement.

3D scanning:

An object or model is taken, it is scanned initially using a 3D scanner converted into the digital scan, later printed using a 3D printer.

It can also scan a human to capture a 3D model of his shape.

It is widely used in photogrammetry, animation, and graphics. It is used for visualizing, simulating and rendering graphic designs.

CMM (Coordinate measuring machine):

Coordinate Measuring Machine uses a probe and measures the geometry of physical objects or entities. It is connected to a PC that has software installed.

The construction consists of a granite or steel table and a rotary table, sleeve, support system, head probe, the position detector, and a scale. These machines are handheld and portable.

The probes used can be mechanical, optical, laser or white light. The PC has software that creates 3D objects, stores the values of the object projected in the probe and gives back information to the CMM.

The Coordinate measuring machine is classified into the following types:

  • Gantry Type
  • Cantilever
  • Fixed Bridge
  • Moving Bridge
  • Horizontal Arm.
  • Column Type.

Where do we need 3D measurements?:

  • Manufacturing Industries to design and develop equipments,machinery and vehicles.
  • In the construction department.To make smaller 3D models of buildings and landscapes.
  • Designing and modelling objects.
  • Medical field to create human organs in digitalized 3D form and to study them in an effective manner for surgeries.
  • 3D animated movies and 3D graphics in games.
  • 3D printing.
  • Aerospace engineering to design propellers,planes and other representation of tools and alter them to form new ones.

Therefore 3D measurements form an important aspect in the evolving industries and technologies in the world.

The demand for its measurement and applications are increasing day by day. In the global level,3D measurement solves complex problems and paves the way to new ideas and designs.

Posted on Leave a comment

Precations while handling digital height gauges

Precautions (Useful tips)

  • Keep the column and the slider, clean. That make measurement easier.
  • When slide Slider securely locks should be off. And remember to ON when required slider at rest position.
  • Set Zero first, If the main scale of the height gauge can be moved, move it as required to set the zero point, and securely tighten the fixing nuts to make it fixed.
  • Errors due to parallax error are not negligible. When reading a value, always look straight at the graduations.
  • You should avoid direct sunlight, high temperatures, low temperatures, and high humidity during storage. If a digital height gauge will not be used for more than three months, remove the battery before storage.

The electronic Height gauge is very compact, simple, easy to use instrument widely used in industries, tool rooms, workshops etc.

Some think you should consider while handling Electronic Height Gauge, Because of the cost of Electronic Height gauge matter in any industries or organization.

Electronic Height gauge used to measure vertical dimension from reference ground. Electronic Height gauge show digital display for output results with a least count of 0.01 mm.

If you are looking for buy this instrument, visit Digital height Gauge store