Linear Measuring instruments used to measure the distance between two surfaces or points ( end measurements) like Vernier Caliper, Micrometer does.
87 learners taking this course
Dimension Measuring instruments are used to measure the distance between two surfaces or points ( end measurements) like Vernier Caliper, Micrometer does.
Some of the linear instruments will not directly provide the measurement of length on a scale. Those are basically dimension transfer instruments like Calipers and dividers. The linear Measuring instruments are simple, accurate, economical, and easy to operate.
Learn the common language of Engineering design, Production, and Quality Assurance , known as Geometric Dimension and tolerancing.
The SI unit of Distance is “Meter”. Distance also measure in mm, cm, km, yard,inch, foot,feet etc.
A proper evaluation of uncertainty is a good professional practice and can provide laboratories and customers with valuable information about the quality and reliability of the result.
Slip Gauge is set standard size rectangular shape block. Slip gauges are available in standard sets in both metric and inch units. In metric units, sets of 31, 48, 56, and 103 pieces are available.
Vernier Caliper is a widely used linear measurement instrument with a least count of 0.02 mm. It is used to measure linear dimensions like length, diameter, and depth.
External/Outside Micrometer It is used to check the outside diameter of the circle by the means of the accuracy of 0.01 mm or up to 0.001 mm. Vernier type Micrometer…
Dial Indicator (or Plunger Dial Gauge) The dial indicator or the Plunger dial gauge is one of the simplest and the most widely used mechanical comparator. First of all the…
Vernier Height Gauge Vernier height gauge used to measure vertical dimensions from reference ground. Vernier Height Gauge consists of a graduated scale or bar that is held in a vertical…
Learn the plain plug gauges and Snap Gauges
Checklist of Before Measurement
Remember during Measurement
Checklist after Measurement